|
Replacing Fuses
Electrical problems can present one of the biggest troubleshooting challenges in automobiles. Unlike flat tires or other easily visible problems, electrical shortcomings can be tough to track down.
Fuse Function
Although many automotive-electrical problems are better left to professionals in these days of computer-controlled vehicles, fuses are one common electrical bug that the average motorist can diagnose and fix. Basically, fuses are an intentional weak link in an electrical circuit. If too much current flows through the circuit for whatever reason, the fuse is designed to "blow" and stop the flow before electrical components are damaged, wires melt and cause a fire, and/or other nasty things. If a car's electrical accessory (such as the horn or radio) mysteriously stops working, the average motorist can potentially save a trip to the shop by checking the fuses first. Typically, fuse panels or "blocks" are located near the steering column, under or below the glovebox or in the engine compartment.
Fuse Types
Modern cars use either glass or blade-type fuses. Cylindrical-glass fuses aren't as common these days, and the more user-friendly blade-style "ATO" fuses began appearing in the '70s. (The two subspecies of ATO fuses are the early ATM style and smaller ATC configuration, which was introduced in the '90s.) They all perform the same function: When electrical current exceeds the circuit's capacity, this overload causes a wire inside the fuse to pop open, which stops the flow of electricity before further damage can be done.
Fuse diagnosis is straightforward:
Look at the wire inside the fuse to see if it's continuous or "blown" open. If it's blown, remove and replace the fuse with one that has the same voltage and amperage rating. (Blade-type fuses are color-coded for easy selection.) Inexpensive plastic tools help remove the fuse without damaging it.
Tips on identifying and replacing a blown or worn out fuse in your automotive :
- To change a fuse, you'll first need to locate your fuse box. It may be in the dashboard or inside the engine compartment. Exact locations vary from model to model, but your owner's manual will tell you where yours is if you have trouble locating it.
- It should be easy to spot a blown fuse, as it will be black inside or have a broken filament.
- For most fuses, you can use a bobby pin or paper clip to help in removing the old fuse. Or you can buy an inexpensive fuse tool at most automotive parts stores.
- Replace the blown fuse with a fuse of the same load amperage. The amperage is printed on the fuse itself.
- Once the bad fuse has been replaced, put the fuse-box cover back on and make certain that it is fastened securely.
Note :
Before doing any work on the fuse box, be certain that the vehicle ignition is turned OFF.
|
